Philips VoiceTracer DVT4010 User Manual page 40

5
Press + / – to select the required recording quality.
The selected microphone/recording sensitivity icon will be
X
displayed.
– optimized setting for the recording of a sound
° –
Dictation
source close to the device.
– optimized recording for subsequent editing
± –
Speech to text
using speech recognition software.
– optimized setting for the recording of multiple
¯ –
Conversation
sound sources in close proximity to the device.
(DVT6010 – DVT8010) – automatic adjustment of
² –
Auto Zoom
the zoom function for a sound source at a larger distance. During
recording the device detects movement and switches automatically
between Zoom and Conversation.
µ – – optimized setting for the recording of a sound
Lecture
source at a larger distance.
· – (DVT6010 – DVT8010) – optimized setting for
Long distance
the recording of sound sources up to 15 meters / 50 feet away.
¸ – – set the microphone/recording sensitivity
Manual setting
manually. Press h / b to select the sensitivity level from 1
(lowest sensitivity, very close) to 9 (highest sensitivity, far away).
Press + / – during recording to adjust the microphone/recording
sensitivity.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
40
Settings
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.5 Enabling/disabling the wind filter
You can also enable the wind filter function to reduce the noise
produced by the wind if you need to make a recording outdoors.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the
Wind filter
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the function.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
function.
Table of contents