Power On/Off; Initial Installation Process - Philips VoiceTracer DVT2015 User Manual

4.2 Power on/off

1
Slide the on/off switch on the side of the device downwards for
approximately two seconds.
The device turns on and the start-up screen is displayed.
X
j e
MENU
2
To power off, pull down the power switch on the side of the device
again and hold for about two seconds.
Note
• The device switches itself off automatically if no key is pressed
within a pre-set period of time
OFF, page 35).
Table of contents
(see also chapter 9.3.2 AUTO-

4.3 Initial installation process

When using for the first time, you must set the display language as well
as the date and time of the device.
4.3.1 Language selection
Follow the description in the chapter "Select language"
chapter 9.2.1 Select language, page
Note
• Your language might not be available. Select an alternative one.
4.3.2 Set date & time
Follow the description in the chapter "Set date & time"
chapter 9.3.1 Set date & time, page
(see also
33).
(see also
34).
First steps
15