Advertisement
xyz x{ | } { ~ z ~ { | z € ‚ ƒ „
Vertical
A/D converter
Deflection factor VOLTS/DIV Range
Position range
Analog bandwidth
Single bandwidth
Selectable analog bandwidth limit (Typical)
Low frequency response (AC coupling, -3dB)
Rise time (at BNC, typical)
DC gain accuracy
DC measurement accuracy (average sampling mode)
Voltage difference (
V) measurement accuracy
(average sampling mode)
8-bit resolution, two channels sampled simultaneously
2 mV/div ~ 5 V/div at input BNC
≥ ± 10 div
200MHz, 150MHz, 100MHz, 60MHz, 40MHz, 25MHz
100MHz, 100MHz, 100MHz,
60MHz, 40MHz, 25MHz
20MHz
10 Hz at BNC
1.8ns, 2.3ns, 3.5ns, 5.8ns, 8.7ns,
100MHz, 60MHz, 40MHz and 25MHz bandwidths respectively
When vertical sensitivity is 2mV/div, 5mV/div: ±4% (sample or average
sampling mode);
When vertical sensitivity is 10mV/div~5V/div: ±3% (sample or average
sampling mode).
When vertical position is zero and N ≥16:
± (4% x reading + 0.1 div + 1mV) and 2mV/div or 5mV/div is selected;
± (3% x reading + 0.1 div + 1mV) and 10mV/div~ 5V/div is selected.
When vertical position is not zero and N ≥16:
± (3% x(reading + vertical shift reading) + (1% x vertical shift reading)] +
0.2div). Set from 2mV/div to 200mV/div plus 2mV;
Setup value > 200mV/div to 5V/div plus 50mV.
Under identical setup and environmental conditions, the voltage
difference (
V) between two points of the waveform after the average of
≥16 waveforms acquired waveforms is taken: ± (3% x reading + 0.05 div)
14ns
at 200MHz, 150MHz,
… †
Advertisement
