P0-8 Perkins Engine Maintenance - Under 1000 Hours - Terex Genie GS-1330m Maintenance Manual

Maintenance Manual
Programmed Maintenance Procedures
P0-8
Perkins Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
Perkins 403D-11
Procedure
Air filter discharge valve - clean
Oil, fuel and coolant systems - check for leaks
Coolant level – check/add
Oil level - check
Fuel system filter/water separator – drain
Engine air precleaner - check/drain
Alternator belt - inspect/adjust/replace
Fuel tank water/sediment - drain
Hoses and clamps – inspect/replace
Cooling system supplement additive - test/add
Engine oil and filter – replace
Fuel system filter(s) - replace
Radiator – clean
Air cleaner element - clean/replace
Fan clearance - check
74
∅ = Not required
Scissor Lifts
November 2021
Hour Intervals
Daily 50 500
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
Part No. 1305686GT