Fuser Fan; Exit Unit - Samsung ProXpress C3060 Series Service Manual

3.3.12. Fuser Fan

1. Remove the right cover. (Refer to 3.3.1.)
2. Unplug the fan connector on the main board.
3. Remove the harness holder[A] after removing 1 screw.

3.3.13. Exit Unit

1. Remove the right cover. (Refer to 3.3.1.)
2. Remove the middle cover. (Refer to 3.3.10.)
3. Unplug the exit unit harness from the main board.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Remove the fuser fan[B] after removing 2 screws.
4. Release the exit unit after removing 4 screws.
3. Disassembly and Reassembly
3-16