3. Disassembly and Reassembly
3.3.16. PH (Paper Handling) Drive Unit
1. Remove the right cover. (Refer to 3.3.1)
2. Remove the main board bracket after removing 4
screws.
3. Remove the rear cover.
4. Release the spring. Remove the poly-washer. And
remove the Duplex Swing Gear Assy [B].
3-19
5. Remove the Inlet Assy[A] after removing 2 screws.
6. Remove the Holder-TR Motor DC after removing 3
screws.
7. Remove the PH drive unit after removing 4 screws.
Copyright© 1995-2017 SAMSUNG. All rights reserved.