Cleaning And Maintenance; Emptying The Dirt Container - Vax BLADE 4 PET User Manual

CLEANING & MAINTENANCE
REMOVING AND REFITTING THE DIRT CONTAINER
WARNING: Always remove the battery before carrying out any maintenance or troubleshooting.
1
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.

EMPTYING THE DIRT CONTAINER

CAUTION: Don't over fill the dirt container to avoid blocking the air flow through the machine.
For best cleaning results, empty the dirt container after every use. Filters should be tapped over a
bin every 4-6 uses to remove dirt and debris and washed every 3 months. Filters should be replaced
every 6-9 months depending on the level of use.
1
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.
2
To refit, line up the dirt container
connection with the handheld handle.
Push the dirt container back onto the
handle until it clicks into place.
2
Hold the dirt container over a bin and
press the dirt release button to allow dirt
and debris to fall out.
support.vax.co.uk
When correctly fitted all 3 connection
points will be aligned and will sit flush.
To close, push the dirt release door until
it clicks into place.
9