Vax BLADE 4 PET User Manual page 8

GETTING STARTED
OPERATION
Press the on/off button to switch the
machine on.
NOTE: The powered floorhead brushbar should be ON for carpets and OFF for hard floors.
Constant use of the boost mode and brushbar will reduce the battery runtime.
When the machine is in use the battery
level indicator lights will illuminate
indicating how much charge is
remaining. When less than 20% charge
is remaining the bottom light will flash
red indicating the battery is running low
and charging is required.
CAUTION: If the brushbar in the powered floorhead has been
obstructed, the brushbar motor protection sensor may have been
activated. The brushbar will stop, the light on the powered floorhead
will illuminate red and the machine may switch off. To reset remove
the powered floorhead from the reach wand/handheld and clear any
obstruction. Wait 1 minute before refitting the powered floorhead tool,
switch the machine on and press the brushbar ON/OFF button.
Press the brushbar on/off button to
switch the brushbar on the powered
floorhead or mini motorised pet tool on.
All of the accessories, including the powered
floorhead and mini motorised pet tool can be
attached directly onto the handheld or the reach
wand. The crevice tool and dusting brush can
be used for hard to reach places and at different
heights for above floor cleaning.
support.vax.co.uk
Press the boost button on to increase
the suction for particularly dirty areas.
8