Maintenance - Packing, Emptying And Cleaning - Vax power 7 VCP7P2400 User Manual

WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening
or emptying the dirt container or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned everytime you empty the dirt container for best cleaning results. Do not use
your vacuum cleaner with blocked fi lters and without ALL the fi lters in place.
Packing away and storage
2
1
NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where the fl oor head and tubes
can be attached for storage and carrying.
Emptying and cleaning the dirt container
1
2
Cleaning the pre-motor fi lter
IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor fi lter. Allow to dry completely
before replacing in the vacuum cleaner.
vax.com.au
Maintenance
NOTE: Tap to remove
excess dirt for a quick
clean.
(Keep your Vax as good as new)
! !
40�C max
! !
NOTE: Wash when
a deeper clean is
needed.
24hr
6