Vax BLADE 4 PET User Manual page 12

CLEANING & MAINTENANCE
REMOVING AND CLEANING THE PET TOOL BRUSHBAR
CAUTION: If the brushbar in the mini motorised pet tool has been obstructed, the brushbar motor
protection sensor may have been activated. The brushbar will stop and the machine may switch off.
To reset remove the tool from the reach wand/handheld and clear any obstruction. Wait 1 minute
before refitting the tool, switch the machine on and press the brushbar ON/OFF button.
Using a coin, turn the brushbar lock
anticlockwise to release the brushbar.
Check the inlet for any blockages
and use a blunt object to remove
the blockage.
Pull the brushbar out from the
brushbar housing.
Refit the brushbar and turn the brushbar lock clockwise to lock.
support.vax.co.uk
To remove any threads or hair slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove. Clear any dirt/debris inside
the housing of the floorhead.
12