Shutting Down The Implement; Disconnecting The Mower From The Tractor - Schulte FX-107 Operator's Manual

10.6 Shutting Down the Implement

To shut down attached mower head, first bring the
tractor to a complete stop. Decrease engine RPM
to idle then disengage cutterhead. The mower head
will come to a complete stop within a suitable
amount of time. Do not engage or disengage the
cutterheads at a high RPM unless there is an
emergency situation.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-U- 0016_G

11. DISCONNECTING THE MOWER FROM THE TRACTOR

Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
FX-107 07/19
© 2019 Alamo Group Inc.
OPERATION
(S3PT-15)
Operation Section 4-36