Schulte FX-107 Operator's Manual page 76

Tractor ID#_______________________
Date: ___________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation
has stopped and the tractor is in park with the parking brake engaged. Make sure
the implement is resting on the ground or securely blocked up and all hydraulic
pressure has been relieved.
The flashing lights function properly
The SMV Sign is clean and visible
The tires are in good condition with proper pressure
The wheel lug bolts are tight
The tractor brakes are in good condition
The steering linkage is in good condition
There are no visible oil leaks
The hydraulic controls function properly
The ROPS or ROPS Cab is in good condition
The seatbelt is in place and in good condition
The 3-point hitch is in good condition
The drawbar pins are securely in place
The PTO master shield is in place
The engine oil level is full
The brake fluid level is full
The power steering fluid level is full
The fuel level is adequate
The engine coolant fluid level is full
The radiator is free of debris
The air filter is in good condition
Operator's Signature:__________________________________________________________________
DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT
FX-107 07/19
© 2019 Alamo Group Inc.
OPERATION
Tractor PRE-OPERATION Inspection
Item
Operation Section 4-24
Make ___________________________
Shift______________________________
Condition at Start Specific Comments if
of Shift not O.K.