Schulte FX-107 Operator's Manual page 87

OPERATION
Large, dense, or wet vegetation may need to be
mowed in two or more passes to achieve a uniform
cut. In such conditions, raise the cutting height to
.
12" or more on the first pass
Then lower the mower to the desired height and
mow the vegetation a second time. If possible,
select a mowing pattern that is at a 90 degree angle
to the first pass to reduce streaking and provide a
.
more even cut
Stay alert and watch for trees, low hanging limbs,
power lines, and other overhead obstacles and
solid ground objects while you are operating. Use
care to avoid hitting these items.
FX-107 07/19 Operation Section 4-35
© 2019 Alamo Group Inc.