Advertisement
2.4
Installation of Type III and Type IV Camera
Before you start:
Both wall mounting and ceiling mounting are suitable for
the dome camera. Ceiling mounting will be taken as an
example in this section. You can take the steps of ceiling
mounting as a reference when adopting wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on the
ceiling according to the supplied drill template.
Note:
Cable hole is required when adopting ceiling outlet to
Route the cable.
3. Loosen the bubble of the dome camera to remove the
bubble and the black liner.
4. Attach the back box of type III camera/base plate of
type IV camera to the ceiling and secure them with
supplied screws.
Type III Camera
Figure 2. 10 Attach the Back Box/Base Plate
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
Type IV Camera
Figure 2. 9 The Drill Template
Screw
Hole
Cable
Hole
Type IV Camera
Advertisement
