Product Documentation; Product Documentation Set - ABB Relion 650 Series Commissioning Manual

Section 1
Introduction
1.3
1.3.1
8

Product documentation

Product documentation set

Engineering manual Engineering manual Engineering manual
Installation manual Installation manual Installation manual
Commissioning manual Commissioning manual Commissioning manual
Operation manual Operation manual Operation manual
Service manual Service manual Service manual
Application manual Application manual Application manual
Technical manual Technical manual Technical manual
Communication protocol Communication protocol Communication protocol
manual manual manual
IEC07000220 V1 EN
Figure 1: The intended use of manuals in different lifecycles
The engineering manual contains instructions on how to engineer the IEDs using
the different tools in PCM600. The manual provides instructions on how to set up a
PCM600 project and insert IEDs to the project structure. The manual also
recommends a sequence for engineering of protection and control functions, LHMI
functions as well as communication engineering for IEC 61850 and DNP3.
The installation manual contains instructions on how to install the IED. The
manual provides procedures for mechanical and electrical installation. The chapters
are organized in chronological order in which the IED should be installed.
The commissioning manual contains instructions on how to commission the IED.
The manual can also be used by system engineers and maintenance personnel for
assistance during the testing phase. The manual provides procedures for checking
of external circuitry and energizing the IED, parameter setting and configuration as
well as verifying settings by secondary injection. The manual describes the process
1MRK 511 209-UEN -
en07000220.vsd
REC650
Commissioning Manual