Raynor U:TRA II 8587WRGD Manual page 29

Operation
®
Get Connected with MyQ
...and control your garage door opener with the MyQ
®
The Wi-Fi Garage Door Opener is compatible with up to 16 MyQ enabled accssories. Up to 10 devices
can be paired to the Wi-Fi garage door opener's internal gateway. These devices can be controlled with
the MyQ app. These devices include any combination of MyQ garage door openers, Wi-Fi garage door
openers, MyQ light controls, MyQ gate operators or MyQ commercial door operators. A MyQ Internet
Gateway (828LG) can be added if you need to control more than 10 devices using the MyQ app. Up to 6
devices can be paired to garage door opener itself (controlled by garage door opener through 900MHz)
These devices include any combination of MyQ light controls or a garage door and gate monitor.
You will need:
A smartphone or tablet
l
Broadband Internet connection
l
A strong Wi-Fi signal in the garage, see page 3
l
Password for your home network
l
®
MyQ serial number located on the garage door opener
l
1. ACTIVATE "WI-FI LEARN" MODE
®
, navigate to Menu > Program > Wi-Fi Setup OR press and release the
Use the Smart Control Panel
yellow LEARN button on the garage door opener 3 times. The garage door opener will beep once and a
blue LED will blink on and off. You have 20 minutes to complete the connection process.
SETUP WIFI
TO REMOTE
®
2. CONNECT TO THE MyQ Wi-Fi NETWORK
On your mobile device, go to Settings > Wi-Fi, and select the network with the "MyQ-" prefix.
®
App.
3. CONNECT THE GARAGE DOOR OPENER TO YOUR HOME WI-FI NETWORK
®
Launch the web browser (Safari or Chrome™) on your smartphone or tablet. Enter
setup.myqdevice.com into the browser address bar. Follow the on screen prompts to connect the garage
door opener to your Wi-Fi network. The MyQ serial number will display in the app. Write serial number in
area provided on front cover of user's guide.
ATT 9:25 PM 100%
http://setup.myqdevice.com
Welcome. This step-by-step guide will
help you connect your Wi-Fi Garage Door
Opener to the internet through your
home's Wi-Fi network.
Press Start to begin the process by
scanning for available networks.
Start
About
Tap EXIT to reconnect your mobile device to your
home's Wi-Fi network.
Exit
©2014 The Chamberlain Group, Inc.
®
4. SETUP YOUR MyQ ACCOUNT
®
Download the MyQ app from the App Store
®
and add the MyQ serial number to your account.
Google Play
or
App Store
Congratulations you've successfully completed the setup. Enjoy MyQ
In addition to controlling your garage door opener you can control your house lighting with additional
®
MyQ accessories, see page 37.
NOTES:
To erase the Wi-Fi settings, see page 33.
29
SM
or Google Play™ store. Sign up for your MyQ
®
Smartphone Control!
®
account