Raynor Sergeant II STANDARD Series Manual

Dc chain drive wi-fi garage door opener

Hide thumbs

page of 44

/ 44
Bookmarks

Quick Links

Download this manual

Sergeant

STANDARD Series

DC Chain Drive

Wi-Fi

Garage Door

Opener

Model 8160WBRGD

FOR RESIDENTIAL USE ONLY

Please read this manual and the enclosed safety materials carefully!

Fasten the manual near the garage door after installation.

The door WILL NOT CLOSE unless the Protector System

aligned.

Periodic checks of the garage door opener are required to ensure safe operation.

The model number label is located on the front panel of your garage door opener.

This garage door opener is ONLY compatible with myQ

ONLY enable the Timer-to-Close or myQ remote operation feature when the garage

door opener is installed on a sectional door.

NOTE: If you are installing the garage door opener on a one-piece door, visit

www.raynor.com for installation instructions.

SERIAL NUMBER:

Please write the myQ Serial number in the box above. See page 2.

Preparation . . . . . . . . . . . . . . . .2-5

Assembly . . . . . . . . . . . . . . . . . . 6

Installation . . . . . . . . . . . . . . . 7-14

Install the Door Control . . . . . . 15-16

Install the Protector System

Power. . . . . . . . . . . . . . . . . . 21-22

Adjustments . . . . . . . . . . . . . 23-25

Battery Backup. . . . . . . . . . . . 26-27

Operation . . . . . . . . . . . . . . . 28-34

Maintenance . . . . . . . . . . . . . . . 35

Troubleshooting. . . . . . . . . . . 36-37

Accessories. . . . . . . . . . . . . . . . 38

is connected and properly

Warranty. . . . . . . . . . . . . . . . . . 39

Automatic Garage Door Opener

Safety & Maintenance Guide . . 40-41

Repair Parts . . . . . . . . . . . . . 42-43

Security+ 2.0

accessories.

CONTENTS

. . 17-20

www.raynor.com

Raynor Garage Doors

1101 E. River Rd.

Dixon, Illinois 61021

Need help?

Do you have a question about the Sergeant II STANDARD Series and is the answer not in the manual?

Questions and answers

Debbie Lamb

May 14, 2025

The light won’t go off after the door closes

1 comments:

Mr. Anderson

May 21, 2025

The light may not turn off after the door closes if the photoelectric sensor is blocked. If something is obstructing the sensor, the system may think there is still an object in the door's path, which can cause the light to stay on. Check that the sensor is not blocked or misaligned.

This answer is automatically generated

Randy Belcher

February 28, 2025

How do I properly align the safety sensors

1 comments:

Mr. Anderson

May 14, 2025

To properly align the safety sensors for the Raynor STANDARD Series:

1. Mount the sensors no higher than 6 inches (15 cm) above the garage floor.
2. Ensure the invisible light beam between the sensors is straight and unobstructed.
3. Confirm the sensors face each other directly across the door opening.
4. Test by waving an object in front of the sensors while closing the door. The door should not close if the beam is blocked.

If the door closes with the beam blocked, realign the sensors.

This answer is automatically generated

Summary of Contents for Raynor Sergeant II STANDARD Series

Page 1 NOTE: If you are installing the garage door opener on a one-piece door, visit FOR RESIDENTIAL USE ONLY www.raynor.com for installation instructions. SERIAL NUMBER: Please write the myQ Serial number in the box above. See page 2.
Page 2 ® Serial Number: Product Serial Number: Date of Purchase: ® Serial Number Serial Number...
Page 3 Check Signal Strength. If you see: Wi-Fi signal is strong. The garage door opener will connect to your Wi-Fi network. Wi-Fi signal is weak. The garage door opener may connect to your Wi-Fi network. If not, try one of the options below to improve the Wi-Fi signal: No Wi-Fi signal.
Page 4 5/32 3/16 7/16 5/16 7/16 9/16...
Page 5 Provided Not Provided...
Page 6 1/2" (13 mm) Washered Bolt 5/16"-18x1/2"...
Page 8 OPTIONAL Unﬁnished CEILING Ceiling MOUNT FOR HEADER Header Wall BRACKET Vertical Centerline of Garage Door Structural Supports Level (Optional) Header Wall 2" (5 cm) Track Highest Point of Travel Door Sectional door with curved track...
Page 9 HARDWARE Lag Screw 5/16"-9x1-5/8" Header (Finished Ceiling) Bracket Ceiling Mounting Holes 6" (15 cm) Maximum Door Spring (Header Wall) Vertical Vertical Centerline of Centerline of Wall Mount Garage Door Garage Door 2x4 Structural Lag Screw Header Support 5/16"-9 x 1-5/8" Bracket Lag Screw (Header Wall)
Page 10 HARDWARE Clevis Pin 5/16" x 2-3/4" Ring Fastener Ring Fastener Connected Disconnected Clevis Pin 5/16" X 2-3/4"...
Page 11 HARDWARE Lock Washer 5/16" Hex Bolt 5/16"- 18x7/8" Nut 5/16"-18 FIGURE 2 FIGURE 1 Unﬁnished Ceiling Finished Ceiling Not Provided (Not Provided) FIGURE 3 Lag Screws 5/16"- 18x1-7/8" Measure Distance Hex Bolt 5/16"- 18x7/8", Lock Washer 5/16", Nut 5/16"-18...
Page 12 Trolley Release Arm...
Page 13 HARDWARE Self-Threading Screw 1/4"-14 x 5/8" FIGURE 2 FIGURE 1 Vertical Reinforcement Vertical Reinforcement Vertical Centerline Vertical Centerline of Garage Door of Garage Door Bolt 5/16"-18 x 2" (Not provided) Door Bracket Lock Washer 5/16" Door Bracket Self-Threading Screw 1/4"-14 x 5/8" Nut 5/16"-18 FIGURE 3 FIGURE 4...
Page 14 HARDWARE Clevis Pin 5/16" x 1-1/4" Hex Bolt 5/16"-18 x 7/8" Lock Washer 5/16" Clevis Pin 5/16" x 1" Ring Fastener Nut 5/16"-18 CORRECT INCORRECT Straight Straight Curved Door Door Arm Curved Door Door (Groove facing out) Ring Fastener Nut 5/16"-18 Clevis Pin 5/16"...
Page 15 Wall 7/16" (11 mm) GANG BOX DRYWALL Drywall Anchor 6-32 x 1" 6AB x 1" DRYWALL HARDWARE Drywall Anchor Screw Screw GANG BOX 6-32 x 1" (2) 6AB x 1" (2) 6AB x 1" Drywall 6-32 x 1" Anchors (2)
Page 16 7/16" (11 mm) Staple...
Page 17 Safety Reversing Sensor Safety Reversing Sensor 6" (15 cm) max. above ﬂoor 6" (15 cm) max. above ﬂoor Invisible Light Beam Protection Area...
Page 18 HARDWARE Carriage Bolt Wing Nut 1/4"-20 x 1/2" 1/4"-20 (Not provided) (Not provided) No more than 6 inches (15 cm) No more Wing Nut than 6 inches 1/4"-20 (15 cm) Carriage Bolt Wing Nut Carriage Bolt 1/4"-20 x 1/2" 1/4"-20 Lens 1/4"-20 x 1/2"...
Page 19 (Not provided) Staple 7/16" (11 mm) Wing Nut 1/4"-20 Carriage Bolt 1/4"-20 x 1/2"...
Page 20 Pre-installed Safety reversing wires 7/16" sensor wires (11 mm) Not Provided Safety reversing Pre-installed wires sensor wires Yellow (for example) White Purple (for example) White/Black Yellow Purple (for example) (for example) Yellow Purple 7/16" (11 mm) To insert or remove the wires from the terminal, push in the tab with a screwdriver tip.
Page 21 TYPICAL WIRING PERMANENT WIRING Ground Tab Green Ground Black Wire Screw Ground Wire Black White Wire Wire...
Page 22 If the receiving sensor is in direct sunlight, switch it with sending sensor so it is on the opposite side of the door. (invisible light beam) Green LED Amber LED SENDING SENSOR RECEIVING SENSOR...
Page 23 PROGRAMMING BUTTONS UP Button Adjustment Button DOWN Button DOWN (Close) UP (Open)
Page 24 PROGRAMMING BUTTONS UP Button Adjustment Button DOWN Button...
Page 26 Battery Status LED...
Page 27 Battery Status LED...
Page 30 Learn Button An LED on the garage door opener will indicate Wi-Fi status. See table below. Learn Button Command...
Page 31 Push Bar SERVICE LED LEARN Button LOCK Button COMMAND LED LIGHT Button...
Page 32 Command LED Command LED LOCK Button LIGHT Button Service LOCK Button LEARN Button LIGHT Button...
Page 33 LEARN Button LEARN LED LEARN button Command LED...
Page 34 LEARN Button Black Adjustment Button...
Page 38 Automatically control your Monitor open/closed status MAX Remote Control: Displays temperature, time lights using your garage door for up to 4 myQ compatible Compatible with Raynor ® and system diagnostics; opener, a Security+ 2.0 ® garage door openers or gate...
Page 40 Automatic Garage Door Opener Safety & Maintenance Guide Garage Door Opener Safety – An Automatic Decision A garage door is the largest moving object in the home. An improperly adjusted garage door and opener can exert deadly force when the door closes – which could lead to entrapment of children or adults and subsequent injury or death.
Page 41 Routine Maintenance Can Prevent Tragedies Make monthly inspection and testing of your garage door and opener system a part of your regular routine. Review your owner’s manual for both the door and door opener. If you don’t have the owner’s manuals, contact the manufacturer(s) and request a copy for your speciﬁ c model(s). Look for the opener model number on the back of the power unit. WARNING –...
Page 42 Repair Parts Rail Assembly Parts Installation Parts Description Part Number Description Part Number Master link kit 004A1008 3V CR2032 Lithium battery K010A0020 Chain pulley bracket 041A4813 Remote control visor clip K029B0137 Complete trolley assembly 041A3489 Emergency release rope and 041A2828 Includes: Master link (2), handle assembly Clevis Pin (1), Ring (1),...
Page 43 041D0277-1 Terminal Block 041A3150 Contact Information Address repair parts order to: For installation and service information call: Raynor Garage Doors 1-800-472-9667 1101 E. River Rd. Or visit us online at: Dixon, Illinois 61021 www.raynor.com Before calling, please have the model number of the garage door opener. If you are calling about a Troubleshooting issue, it is recommended that you have access to your garage door opener while calling.

This manual is also suitable for:

Sergeant ii standard 8160wbrgd