A Look At The Display - GRE PSR-255 Owner's Manual

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current
operation.
MAN - appears when you manually select a channel.
SCAN - appears when you scan channels.
MON - appears when you listen to the monitor memory.
BATT - appears when battery power is low.
L/O - appears when you manually select a channel you locked
out.
SRCH - appears during a band or direct frequency search.
/\ or \/ - indicates the search or scan direction.
DELAY - appears when you program a 2-seconds delay for a
channel.
PGM - appears while you program frequencies into the
scanner's channels.
(key symbol) - appears when you lock the keypad.
CH - appears after the digits (1-50) that show which channel
the scanner is tuned to.
-d - appears during a direct frequency search.
000.000 - the digits on the right of the display show which
frequency the scanner is tuned to.
Error - appears when you make an entry error.
dUPL (duplicate) - appears when you try to store a frequency
that is already stored in another channel.
10