A Look At The Display - GRE PSR-100 Owner's Manual

SCAN/MAN – Scans any preprogrammed channels or stops scanning and
lets you directly enter a channel number.
PRI/ALERT – Turns on and off the priority feature; turns the SAME standby
mode on and off.
Number Keys – Each key has single-digit (0 to 9) and a range of numbers. Use
the range of numbers above the key (21–40 for example) to select the channel
in a channel-storage bank.
TUNE/CLEAR – Lets you tune a frequency along with
incorrect entry.
/ – Searches up or down for active frequencies or selects the direction
when scanning channels.
L/O RVW/L/O – Reviews locked-out frequencies; lets you lock out selected
channels or frequencies.
/ – Locks (and unlocks) the keypad to prevent accidental entries; turns
the backlight on and off.
PGM – Programs frequencies into channels.
DELAY /• – Programs a 2-second delay for the selected channel; enters a
decimal point.
ENT (enter) – Enters frequencies into channels.

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current operating status.
This quick look at the display will help you understand how your scanner oper-
ates.
– Appears when the scanner sweeps the frequencies to rapidly detect,
monitor and store it for nearby radio transmissions.
– Appears when you lock the keypad.
BANK – Appears with numbers (1–10) to indicate the scan bank. Bank num-
bers with a bar under them show which banks are turned on for scanning (see
"Understanding Banks" on Page 14).
WX – Indicates that the scanner is active for weather channels.
MAR – Indicates that the scanner is active for marine bank.
12
1 2 3 4 5 6 7 8 9 10
BANK
WX MAR
CH
SRCH SCAN MAN PGM
FD PD AIR HAM
/
PRI
or or, clears an
B
L/O
DLY