GRE PSR-255 Owner's Manual page 13

3. Use the number keys and DLY/. to enter the frequency
(including the decimal point) you want to store into that
channel.
4. Press E to store the frequency.
Notes:
h If you entered an invalid frequency in Step 3, Error ap-
pears, the channel number flashes, and the scanner beeps
three times after you press E. Simply repeat Steps 3 and
4.
h Your scanner automatically rounds the entered frequency
down to the nearest valid frequency. For example, if you
enter a frequency of 151.4730, your scanner accepts it as
151.4700.
h If you entered a frequency that is already stored in an-
other channel, dUPL (duplicate) and the lowest-numbered
channel containing the duplicate frequency flash for about
3 seconds. To store the frequency anyway, press E again.
5. Repeat Steps 2-4 to store more frequencies into chan-
nels.
Band Search
If you do not know of a frequency to store, you can search
your scanner's preprogrammed search bands (see "Search
Bands") for active frequencies, then store any that you find
into your scanner's channels.
Follow these steps to search for and store active frequen-
cies using band search.
1. Press BAND. The last selected band number (b followed
by the band number) and the frequency search range
appear for about 2 seconds.
2. To select a different band within 2 seconds, enter the
band's number (0-9) or repeatedly press BAND until the
desired band number appears.
After about 2 seconds, SRCH, /\ appears, the next avail-
able channel flashes, and the scanner begins searching
rapidly upward in that band (from lowest to highest fre-
quency) for an active frequency.
13