Networking; Miele@Home - Miele TXR 860 WP Operating Instructions Manual

Networking

Miele@home

Control the networking of your dryer
with your WiFi network.
The following points may appear in the
submenu:
Set up
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
Please refer to "Initial commissioning"
for instructions on how to set up the
connection.
Activate
(visible if Miele@home is deactivated)
The WiFi function is reactivated.
Deactivate
(visible if Miele@home is activated)
Miele@home remains set up; the WiFi
function is turned off.
Connection status
(visible if Miele@home is activated)
The following values are displayed:
- the quality of WiFi reception
- the network name
- the IP address
Set up again
(visible if set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
Reset
(visible if set up)
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default.
The network configuration should be
reset whenever a tumble dryer is being
disposed of or sold, or if a used tumble
dryer is being put into operation. This is
the only way to ensure that all personal
data has been removed and the
previous owner will no longer be able to
access the tumble dryer.
A new connection setup has to be
carried out in order to use the
Miele@home setting again.
Settings
93