Starting A Program - Miele TXR 860 WP Operating Instructions Manual

5. Starting a program

Starting a program
The program can be started when the
Start/Stop sensor button is flashing on
and off.
 Touch the Start/Stop sensor button.
The Start/Stop sensor button lights up
constantly.
 Status

Time left
Normal
Drying and the program duration
remaining will light up in the display.
The laundry will be cooled down shortly
before the end of the program.
Useful tip: In the pull-down menu, you
can view the selected drying level or
duration and the energy consumption.
With programs with a selectable drying
level, calculates the residual
PerfectDry
moisture present in the laundry to
ensure precise drying results. However,
if you load the dryer with little or dry
laundry, it will be dried / aired for a set
duration.
The PerfectDry display will only light up
with programs with selectable drying
levels:
- hollow point  after a program has
started
The drying level reached will still be
shown later on.
30
11:02

1:42 h
Machine Iron
 PerfectDry
Add laundry
- solid point  when the drying level is
reached
The time left for the drying level
programs can vary or "jump". It
depends on the load quantity, type of
laundry, residual moisture in the
laundry, or water hardness.
continually adapts, constantly
increasing the accuracy of the time left.

Avoid over-drying laundry and
garments.
Otherwise they can wear out!
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor button starts
flashing.
 Touch the Start/Stop sensor button to
switch the indicators on again (this
does not have any effect on a running
program).
The drum lighting switches off once the
program has started.
Adding laundry
You can add laundry after the program
has started.
 Follow the description in "Changing
the program sequence – Adding or
removing laundry".
PerfectDry