Miele TXR 860 WP Operating Instructions Manual page 86

Installation
5. Change the door hinge on the door
The door hinge is secured to the door
with 2 angled rods. These rods need
to be removed with a screwdriver or
pointed pliers.
 Insert the end of the screwdriver
blade under rod  and rotate it so it
is in an upright position. Do the same
to the other rod.
 Use the screwdriver or pointed pliers
to guide first one then the other rod
 to the middle until each can be
removed.
86
Useful tip: In some circumstances, the
rods can be difficult to dislodge.
Moving the screwdriver with a levering
action while pulling at the same time
may help to work the rods free.
 Remove the door hinge and turn it
through 180°.
 Refit the door hinge on the opposite
side of the door.
 Secure the door hinge with the two
rods .
 Position the screwdriver under the
end of the rod and then push it into
its resting position .