Ametek SURAGEX AXESS Reasy FLATPAK SA-82-AR Hardware Installation Manual page 5

_________________________________________________________________________________________
III. Initial Set-Up
1. Device Management Utility (DMU)
The SurgeX Device Management Utility (DMU) provides the
easiest means to find and configure your AR for use. The DMU
can:
1. Automatically discover multiple ARs on a local
network.
2. Display the current IP address of each AR.
3. Allow the setting of a new IP address for each AR.
4. Perform firmware upgrades.
5. Return an AR to Factory Defaults.
The SurgeX Device Management Utility is available on the
SurgeX website at http://www.surgex.com
Note: The IP address can only be set within the first
2 minutes after powering up the AR. The utility will only work with
ARs on the same local subnet as the PC.
Device
Discover: Automatically discover all ARs on the local
network. The DMU will display the location name
of the AR, the product ID and version number, the
current IP address, and the MAC address. Factory
defaulted ARs will display with the name Axess
Ready and have an IP address that was
automatically assigned by the DHCP server on your
network.
Add: Manually add an AR by IP address.
Clear: Clear the list.
© 2019 AMETEK Electronic Systems Protection | Technical Support: 800-645-9721 | surgex.com
SA-82-AR
The IP address field also indicates the port
for web access that is currently in use by
the AR. The standard port for web
browser accessibility is factory
default Port 80.
User Manual
4