Table of Contents
Advertisement
_________________________________________________________________________________________
Advanced Network
HTTP Port: Specify the port the web server will be accessed on. If the port is changed from the default
value of 80, the AR may be accessed by specifying the new port number in this format:
http://IPADDRESS:NEWPORT. Example: Navigate to
192.168.1.254 on port 8000.
Linkback URL: This setting allows control of the hotlink displayed on the Goodbye page. It allows use of the
public IP address or DNS name instead of the internal IP address of the AR, which is the default setting. If this
setting is left blank, the hotlink will be the IP address of the unit. Enter up to 128 characters.
Telnet Port: Specify the port to use for telnet access (default 23).
DxP Port: Specify the port to use for
Time Setup: Setup of the time server is required for Scheduling and Logging
functions.
© 2019 AMETEK Electronic Systems Protection | Technical Support: 800-645-9721 | surgex.com
Enable: Enable or disable the use of the time server.
Time Server: Specify the time server. The default is time.nist.gov.
Zone: Specify the time zone (-12 to +12) relative to GMT.
Time
DST Enable: Enable or disable the use of Daylight Savings Time.
DST Start/Stop: Specify the start and stop times for DST.
SA-82-AR
http://192.168.1.254:8000
DxP protocol (default 9100).
User Manual
for an IP address of
10
Advertisement
Table of Contents
