Ametek SURAGEX AXESS Reasy FLATPAK SA-82-AR Hardware Installation Manual page 22

________________________________________________________________________________________________
4. Commands
There are currently 7 command classes. All classes are defined in the C programming enumerated type
definition below:
typedef enum { eCmnd_null,
eCmnd_set,
eCmnd_get,
eCmnd_io,
eCmnd_keepAlive,
eCmnd_rss,
eCmnd_rcu
} eCmnd;
Command
0 eCmnd_null
1 eCmnd_set
2 eCmnd_get
3 eCmnd_io
4 eCmnd_keepAlive
5 eCmnd_rss
6 eCmnd_rcu
5. Descriptors
Descriptors are used to describe the individual command within a command class, and the payload that the
packet contains. All of the descriptors and their payloads are outlined by command class below.
eCmnd_set
The descriptors for this command class will be product specific.
eCmnd_get
The descriptors for this command class will be product specific.
© AMETEK Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com
SA-82-AR
Description
This is a null command and should not be sent to the server.
This command is used to set programmable variables on the server.
This command is used to get programmable variables from the server.
This command is used to monitor and control the I/O on the server.
This command is sent to the server as a means of allowing the client to
validate the communications path to the server.
This command class is used to control the RSS nest using the
RCU.
Note: Project specific command. Not for general use.
This command class is used to update the display of the RCU.
Note: Project specific command. Not for general use.
User Manual
21