Samsung XA060J User Manual page 91

Step 3
Adjust the calibration coefficients. This step is similar to that for a new receiver card.
Step 4
Click the Save button to save the adjusted calibration coefficients to the hardware. The save
coefficients won't be lost even the system is powered off. Shown in Fig.9-31 is the page for
saving the calibration coefficients.
The adjustment operations in Step 2 and Step 3 can also be applied to other areas that
need the same adjustment. Click Apply The Effect To Other Area item on Fig.9-31 to open
the page for setting. Shown in Fig.9-32 is the page for Apply The Effect To Other Area.
Fig 9-31
Fig 9-32
91