Screen Config - Samsung XA060J User Manual

9.5 Screen Config

To configure a LED display with system configuration files, click Screen Config button
fromthe tool bar or select Tools->Screen Config from the main menu of the NovaLCT-Mars
application main interface to open the Screen Config window. Shown in Fig.9-5 is the
Screen Config window.
Step 1: Set the Current Operation Communication Port
This is the port that connects the sending board (controller) to be configured to the control
computer. If only one serial port of the computer is used to connect the LED display control
system, the used serial port will be automatically set as the current serial port. Otherwise, if
multiple serial ports are used to connect control systems to the computer (one serial port for
one control system), the serial port that is used to connect the control system which is to be
configured should be set as the current serial port. If it's the mode with no sending board,
please set the corresponding network port.
Step 2: Load system configuration file
Select Load Config File option, use Browse button to select the system configuration file
to be loaded and then click Next. The selected configuration file will be automatically loaded
to the LED display system. The LED display system will have been configured when the
load operation is finished.
Fig 9-5
50