Table of Contents
Advertisement
9. Control system setting
9.1 Software setup
It is sample to install the <NovaLCT-Mars> as below:
Double-click NovaLCT-Marssetup file,(see Fig.9-1), select <Next> to start, follow the guides
to finish the setup.
When the setup of the < NovaLCT-Mars> is completed, the <LED software> will show up
in the <Start/<Program>. Click to start operation after entering < NovaLCT-Mars> in the
program as Fig. 9-2 shown
There are shortcuts of < NovaLCT-Mars> in the desktop as icon shown,
double-click it to start up the program.
Fig 9-1
Fig 9-2
45
Advertisement
Table of Contents
