Power-data cable
Power off the cabinet where the power-data cable is in
Remove the modules which connect the bad power-data cable by front service tools as
same as the module replacement steps.
Remove the screws which connect the bad power-data cable into the modules by short
screwdriver and take away modules as shown below
Remove the screws which connect the bad power-data cable into the power box by
screwdriver and take away the bad power-data cable as shown below
Bring a new power data cable and install it into the power box first by screwdriver as shown
below
Install back the modules which connect to the new power-data cable as shown below, and
then install back all the module as same as the modules replacement steps
Power on the cabinet.
108