Step 2
Double click the selected cabinet to open the page for specifying the new module. Shown in
Fig.9-26 is the page for specifying the new module.
Module Size
Set the pixel array size of a module here. NovaLCT-Mars divides a cabinet into modules
according to the module pixel array size and the cabinet pixel array size.
Step 3
Select the calibration coefficients source. Calibration coefficients generated according to
those of the surrounding modules are used for the new module because the coefficients
saved in the receiver card or the database are not suitable for the new module. Shown in
Fig.9-27 is the page for selecting the coefficients source.
Fig 9-26
88