Safety Guidelines - Samsung XA060J User Manual

1.2 Safety Guidelines

Personal protection
Ensure you understand and follow all the safety guidelines, installation instruction, warnings
and symbols.
Mind yourself while working with heavy loads and high voltage.
Contact with high voltage may cause death or serious injury. Always disconnect power to the
display cabinet or cabinets prior to servicing.
All personnel at the LED Video Board installation site are required to have personal
protection equipment (PPE) such as hard hats, safety glasses, gloves, harnesses, and other
appropriate safety equipment.
Equipment protection
This installation must be performed by authorized and qualified technical personnel only.
Accredited safety officers must ensure the safety of the site, construction, assembly,
connection, use, dismantling, transport etc.
Assembly parts are designed for use only with Samsung displays.
LEDs use specific materials and manufacturing processing in order to achieve unique
advantages.Do not modify and/or replicate any components.
Ground the LED display screen before connecting the power source.Contacting displays
that are not earth-grounded may cause death or serious injury.
Do not use the LED display screen ground lugs for installation equipment such as welding
equipment.
Structural & mounting components should be kept dry, clean, lubricated (only if
recommended), coated properly, and maintained in a manner consistent with part design.
LED products must be installed and operated in a manner to reply on its design and
inspection a routine basis for security, wear, deformation, corrosion and any other
circumstances that may affect the load handling capability of the part.
We recommend inspections at regular intervals for all installations and increasing in
frequency for more critical installations. A part is damaged which may cause a decrease in
load capability. The part must be removed for service or replaced immediately.
Always follow LED display screen installation instruction.
Contact the support technical person if user has any question regarding the safety of an
application. The manufacturer assumes no liability for incorrect, inadequate, irresponsible or
unsafe assembly of systems.
5