Error Code List - Jack JK-T5878-58G Instruction Manual

ERROR CODE LIST

Error
code
E01
E02
E03
E04
E05
E06
E07
E08
E09
E10
Description of error
Copy file ok,Do you
want to reset system?
Clamp foot may
collided with center
knife
Pattern NO.error
Sewing head center
point sensor error
Sewing head right
point sensor error
Data write from U-
disk cannot be
performed
Clamp foot stepping
motor origin retrieval
error
Clamp foot motor
step-out error
Data write from LCD
cannot be performed
Needle bar upper
position failure
Reason
- - -
The space between left and
right clamp foot and center
knife edge is not enough.
This numbers does not exist
in the registered program
Sewing head is not in the
right position.
Sewing head is not in the
right position.
Cannot write data to the
Udisk
- - -
- - -
Data write from the user list
of screen cannot
performed.
Needle drifts off upper
position
65
How to recover
- - -
If there is no problem,press
Reset-key to
continue.Otherwise turn off
the power and choose suitable
spare parts of center knife
Create a new number to this
program
Please check the sensor and
signal cable of servo motor
which control the movement
of machine head,then press
reset key.
Please check the sensor and
signal cable of servo motor
which control the movement
of machine head,then press
reset key.
Check out whether the digital
U disk is working fine
Possible to re-start after reset
Possible to re-start after reset
Check out whether the list is
be right.
Turn the handwheel,
needle return to the upper
position.
let