计数的解除方法; Releasing Procedure Of Count-Up - Jack JK-T5878-58G Instruction Manual

数值设定凸起画面(画面D)
Numerical setting pop-up screen
(screen D)
(2) 计数的解除方法

Releasing procedure of count-up

变更计数器目标值
4)
件数计数器时，按下按钮
显示出来，可以设定计数器现在值。
Change the target value of counter
In case of the number of pcs counter, press button
"Numerical setting pop-up screen (screen D)" is displayed. Then the
target value of counter can be set.
在这里，请输入计数器目标值。向计数器目标值输入0之后，缝
制中仅显示现在值，不显示计数器加数画面。
Here, input the target value of counter. When "0" is inputted to the
target value of counter, only the target value is displayed during
sewing and the count-up screen is not displayed.
在缝制中，达到了计数条件之后，显示计数画面，蜂鸣器鸣响。按
○
了清除按钮 A 之后，复位计数器，返回缝制画面。然后重新
开始计数。
During the sewing work, the count-up condition is reached the count-up
screen is displayed and the buzzer sounds. Press CLEAR button
○
A to reset the counter, and the screen returns to the sewing screen.
And, counting starts again.
20
○
之后，设定凸起画面(画面D)被
D
○ and
D