Advertisement
Replacing Remote Control Batteries
1 Button Remote Control - Model 181BP / 181SP
The CR2032 battery inside each remote control should last approximately 1 year under
normal use. When the battery becomes weak you will notice the remote control range
(the distance from the vehicle the remote control will work) deteriorate and the small LED
on the remote control will dim. To replace the remote control batteries:
1.
Using a coin, unsnap and disassemble the halves of the remote control.
2.
Remove the old battery, observing the +/- symbols on the battery
and replace with new battery.
3.
Reassemble the halves of the remote control.
4.
Test operation of the remote control.
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that
may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
PE1BZ_PE1BZLR / FLRS Owners rev A.
Voxx Electronics Corporation.
Customer Service 1-800-225-6074
www.VoxxElectronics.com
PATENTED: www.voxxintl.com/company/patents
5
Advertisement
