Prestige PE1M2LEDZ Owner's Manual

Prestige PE1M2LEDZ Owner's Manual

Flashlogic flrs rf upgrade kit
Hide thumbs Also See for PE1M2LEDZ:

Advertisement

Owner's Guide
For Models:
PE2LEDZ
PE1M2LEDZ
Flashlogic FLRS
RF Upgrade Kit
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
PE2LEDZ - PE1M2LEDZ / FLRS Owners rev A.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PE1M2LEDZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Prestige PE1M2LEDZ

  • Page 1 IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. PE2LEDZ - PE1M2LEDZ / FLRS Owners rev A.
  • Page 2 Table of Contents Using Your Remote Control ............3 Remote Start Valet Mode ............4 2 Way Remote Control Notifications .........5 Remote Control Programming ...........5 Replacing Remote Control Batteries ........6 2018 Voxx Electronics Corporation. All rights reserved.
  • Page 3 (5 to 60 minutes selectable). Remote Start Shutdown Press and release the button 2 times within 2 seconds to turn the vehicle off. Pressing the vehicle’s brake will also shutdown the remote start. PE2LEDZ - PE1M2LEDZ / FLRS Owners rev A.
  • Page 4 Entering the Vehicle while it is Running via Remote Vehicle Start Unlock the vehicle’s doors. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL! Insert the key into the ignition switch and turn to the ON or RUN position. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.
  • Page 5 NOTE: This system has 1 button programming which programs all channels of the system. NOTE: The system will hold up to 4 transmitters in memory, programming a 5th transmitter will erase the oldest transmitter in memory. PE2LEDZ - PE1M2LEDZ / FLRS Owners rev A.
  • Page 6 Replacing Remote Control Batteries 5 Button Remote Control - Model 185SP (PE2LEDZ Only) The CR2032 battery inside each remote control should last approximately 1 year under normal use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.
  • Page 7 2 Way LED Remote Control - Model 18TWLOR (PE1M2LEDZ Only) The CR2450 battery inside the 2-way LED remote control should last approximately 6 months under normal use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and give an additional flash upon button presses.
  • Page 8 Voxx Electronics Corporation. Customer Service 1-800-225-6074 www.PrestigeCarSecurity.com FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.

This manual is also suitable for:

Pe2ledz

Table of Contents