Audiovox remote car starter installation manual (24 pages)
Summary of Contents for Prestige PE1BZLR
Page 1
Owner’s Guide For Model: PE1BZ PE1BZLR Flashlogic FLRSBA RF Upgrade Kit IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
Page 2
Table of Contents Using Your Remote Control ............3 Remote Start Valet Mode ............4 Remote Control Programming ...........4 Replacing Remote Control Batteries ........5 2018 Voxx Electronics Corporation. All rights reserved.
Using Your Remote Control Door Lock To lock the vehicle doors press and release the button. Door Unlock To unlock the vehicle doors press and release the button 2 times. Remote Starting Your Vehicle To activate the remote start, press and hold the button for 3 seconds.
Remote Start Valet Mode Enter / Exit Valet mode for systems using an Flashlogic FLRS kit. Cycle ignition ON five times [5x OFF/ON] rapidly. (complete this step within 7 seconds) Wait, LED 1 (on the FLRS kit) will turn solid RED for 2 seconds. Turn ignition to OFF position.
Replacing Remote Control Batteries 1 Button Remote Control - Model 181BP / 181SP The CR2032 battery inside each remote control should last approximately 1 year under normal use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.