Prestige PE1BZ Owner's Manual

Prestige PE1BZ Owner's Manual

Apsrs rf upgrade kit
Hide thumbs Also See for PE1BZ:

Advertisement

Owner's Guide
For Models:
PE1BZ
PE1BZLR
APSRS
RF Upgrade Kit
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2019 Voxx Electronics Corporation. All rights reserved.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PE1BZ and is the answer not in the manual?

Questions and answers

Summary of Contents for Prestige PE1BZ

  • Page 1 Owner’s Guide For Models: PE1BZ PE1BZLR APSRS RF Upgrade Kit IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
  • Page 2: Table Of Contents

    Table of Contents Using Your Remote Control ..............3 Locking the Vehicle Doors ..............3 Arming the Security System .............. 3 Unlocking the Vehicle Doors ............. 3 Disarming the Security System ............3 User Selectable Notification Chirps ........... 3 User Selectable LED ................. 4 Programmed Transmitter Notification ..........
  • Page 3: Using Your Remote Control

    Using Your Remote Control Door Lock To lock the vehicle doors press and release the button. Arming the Security System (Optional) To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 1 time, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature.
  • Page 4: User Selectable Led

    User Selectable LED This feature will control whether the LED is ON or OFF when the system is Armed/ Locked and can be toggled ON or OFF without entering the programming feature banks. Turn the ignition ON, OFF, ON, OFF. Press and hold the valet/programming button for 5 seconds.
  • Page 5: Using Your Remote Vehicle Starter

    Using Your Remote Starter Remote Starting Your Vehicle To activate the remote start function, press and hold the button for 3 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will start.
  • Page 6: Remote Start Ready Mode

    Remote Start Ready Mode must be enabled if your vehicle is equipped with a manual transmission. Remote Start Ready Mode - Manual Transmission Vehicles Only To activate the remote start function, the system must first be in Remote Start Ready Mode.
  • Page 7: Cancelling Remote Start Ready Mode

    Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only The system will exit remote start ready mode if any of the following occur: Open any door Open the hood or trunk (if connected) Press the brake Release the parking brake Turn the ignition ON Using the “Quick-stop”...
  • Page 8: Status Led, Light Flashes And Siren/Horn Indications

    Status LED, Light Flashes, and Siren/Horn Indications Status LED Flash Indications LED Flashes Function Disarmed Slow Flash Armed Fast Flash Passive Arming Countdown ON (Solid) Valet Mode 1 Flash / Disarmed Zone 1 Trigger, Shock Sensor 2 Flashes / Disarmed Zone 2 Trigger, Trunk / Hood 3 Flashes / Disarmed Zone 3 Trigger, Door...
  • Page 9: Replacing Remote Control Batteries

    Replacing Remote Control Batteries 1 Button Remote Control - Model 181BP / 181SP The CR2032 battery inside each remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.
  • Page 10: Warranty Information

    LIMITED LIFETIME WARRANTY Applies to Prestige Series Control Modules, Sirens, Sensors, and Relays. Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, (other than transmitters) under nor- mal use and conditions, be proven defective in material or workmanship during the life-...
  • Page 11 Voxx Electronics Corporation. Customer Service 1-800-225-6074 WWW.ADVENTPRODUCTS.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.

This manual is also suitable for:

Pe1bzlr

Table of Contents