Flow Temperature - Viessmann Vitotronic 200 Operating Instructions Manual

Central heating/central cooling
Comfort function "Party mode"
5. Set the required room temperature for "Party
mode".
Party mode
Change with
Fig. 18
Note
In conjunction with a ventilation unit:
Set the room temperature for ventilation max. 4 °C
lower than for "Party mode". This will ensure that
the bypass functions correctly.
Ending "Party mode"
■ "Party mode" ends automatically after 8 hours.
or
"Party mode" ends automatically if the time pro-
■
gram changes to the "Standard" or "Fixd value"
operating status.
or
Set "Party mode" to "OFF".
■
Energy saving function "Economy mode"
Setting "Economy mode" for heating
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Economy mode"
30
(cont.)
HC1
23°C
(
For the preferred heating circuit: display in the
standard menu
14°C
14°C

Flow temperature

Flow temperature
Fig. 19
Note
The display of the set room temperature in the stand-
ard menu does not change.
■ The rooms are heated or cooled to the set tempera-
ture.
■ If your contractor has not made alternative adjust-
ments, DHW is heated to the selected DHW temper-
ature first, before central heating/central cooling
commences.
■ The DHW circulation pump is switched on (if instal-
led).
HC1
HC1
21°C
21°C
40°C
40°C