Makita TM30D Technical Information page 6

5-1-2 Assembling
[1] Assemble by reversing the disassembly procedure.
[2] Be sure to attach Cap to DC motor, and assemble DC motor to Crank housing complete.
Note: Assemble Spacer to DC motor side or Crank housing complete side in advance.
[3] Assemble DC motor to Motor housing set (L) while aligning the notch of DC motor with the projection of Motor housing set
(L).
Notch of DC motor
Projection of Motor
housing set (L)
Fig. 5-1-2-1
Cap
DC motor Spacer
Fig. 5-1-2-2
DC motor
6 / 13
Crank housing
Crank shaft
Motor housing
set (L)
complete