Makita TM30D Technical Information page 5

[4] Remove DC motor section with Crank housing complete from Motor housing set (L).
[5] Remove DC motor section from Crank housing complete.
[6] Remove Spacer, Cap and Terminals from DC motor, then replace DC motor with a new one.
Note: Spacer may remain in Crank shaft side.
Terminal
Fig. 5-1-1-4
.
DC motor
DC motor
section
section
Crank housing
complete
Fig. 5-1-1-5
DC motor
section
Fig. 5-1-1-6
Crank shaft
Cap
DC motor Spacer
5 / 13
Crank housing
complete
Motor housing
set (L)
Motor housing
set (L)
Crank housing
complete