Service, Maintenance And Disposal; Repair Work And Modifi Cations; Calibration And New Adjustment; Cleaning - Camille Bauer SIRAX BT5300 Device Handbook

Table of Contents

8. Service, maintenance and disposal

For devices that have not been opened in the factory, no warranty or guarantee can be assumed.

8.1 Repair work and modiﬁ cations

Repair work and modiﬁ cations shall exclusively be carried out by the manufacturer. Do not open the housing of the device. In case of any tampe-

ring with the device, the guaranty claim shall lapse. We reserve the right of changing the product to improve it.

Each device is adjusted and checked before delivery. The condition as supplied to the customer is measured and stored in electronic form.

The uncertainty of measurement devices may be altered during normal operation if, for example, the speciﬁ ed ambient conditions are not met.

The display and the operating keys should be cleaned in regular intervals. Use a dry or slightly moist cloth for this.

Damage due to detergents

Detergents may not only aff ect the clearness of the display but also can damage the device.

Therefore, do not use detergents.

The disposal of devices and components may only be realised in accordance with good professi-

onal practice observing the country-speciﬁ c regulations. Incorrect disposal can cause environ-

mental risks.

All devices delivered to Camille Bauer Metrawatt AG shall be free of any hazardous contaminants (acids, lyes, solutions, etc.).

Use original packaging or suitable transport packaging to return the device.

Damage by returning

Damages caused by improper returning, no warranties or guarantees can be given.

PM 1000290 000 00

Device handbook SIRAX BT5300

26/31

Table of Contents