Cleaning The Heat Shoes - usi MRL Series Operation And Maintenance Manual

CLEANING THE HEAT SHOES

With continuous use the heat shoes may accumulate
adhesive and dirt. It is recommended that you periodically
inspect them for adhesive build-up.
Use USI's Laminator Cleaning Kit, which contains a
foam cleaner for use on the heat shoes & rubber rollers,
a coarse scrubbing pad designed for cleaning rubber
rollers, and a mesh covered sponge, for removal of
any adhesive buildup on the heat shoes.
NOTE: Be sure to clean the heat shoes only
when the laminator is cool.
CAUTION: Teflon coated heat shoes are scratchable.
YOUR SOURCE FOR LAMINATION • USI
Photo 17A.
Photo 17B.
19