Care And Cleaning - usi PROMOUNT PLUS 2700 Owner's Manual

CARE AND CLEANING

4
1. This appliance is for Office or Household use only. Any servicing, other than cleaning and user
maintenance, should be performed by an authorized service representative.
2. Do not immerse in water.
3. To reduce the risk of fire or electric shock, do not remove the base. No user serviceable parts
are inside.
4. Keep your hands and cord away from hot parts of the appliance during operation.
5. Never clean with scouring powders or hand implements.
6. Wipe clean with a soft cloth.
7. Shield is available as an accessory.
MOUNTING MADE EASY
5
USI's full line of mounting and laminating products are designed and engineered to allow the
novice user to confidently mount and laminate wide format graphic prints. The user selects from
pre-sized mount boards and laminating pouches. Pre-sized means no guesswork. Simply match
up the size of the print to the matching size board or pouch. Save time and money. Trimming and
waste are completely removed. It's easy, hassle-free, and can be done in two simple steps!
1. Select the correct-size mount board or pouch film for the print.
Note: when using a laminating pouch or mount board with film overlay, the document will be
slightly smaller than the film or board being used, this will allow for encapsulation.
2. Simply slide the print in between the film pouch or mount board pouch and run it through USI
ProMount Plus 2700 roll laminator.
FOAM BOARD OPTIONS
ProMount Foam Board (No Adhesive)
ProMount Foam boards are foam boards without
any adhesive. Easy to use and economical, they
are designed for jobs that will not be displayed for
extended periods of time
Mount a laminated or non-laminated print by
smooth surface
3/16" & 1/4" thick