Table of Contents
Advertisement
FIND A WORK AREA
A separate work station is required to house your USI laminator. Ample room is necessary
to access the laminator from all 4 sides. If the laminator is back against a wall, the laminating
film may back up and jam the equipment. Your laminator must be on a stable, level surface.
A USI laminator cabinet is an excellent choice for a work area. It can easily be moved and
provides sufficient storage for film in the cabinet below.
WARNING: Do not place the laminator where the heat shoes will be in the direct path
of a room cooling fan, air conditioner or similar forced draft.
Tools necessary to set up your laminator include cutting shears and any adhesive tape.
For future service or maintenance, an assortment of Allen wrenches, a flat head screwdriver
and a Phillips head screwdriver are necessary.
LAMINATOR SPECIFICATIONS
POWER REQUIREMENTS
6
USI • YOUR SOURCE FOR LAMINATION
42" MRL
Accepts:
41-1/4"
Weight:
300 lbs
Width:
51"
Depth:
26"
Height:
23"
Speed Variable:
15'
42 MRL
220-240VAC
Single Phase
3 Wire
30 amp
6000 Watts
Photo 6A.
USI's Heavy
Duty
Laminator
Cart.
Advertisement
Table of Contents
