Security-Relevant Log Messages - Pilz PCOM sec br2 Operating Manual

Security-relevant log messages

15 Security-relevant log messages
Entry ID
107
108
109
200
201
401
402
600
701
702
1000
1001
1002
1100
1101
1105
1106
1107
1108
1109
Operating Manual PCOM sec br2
1004534-EN-04
Error message
The file "{{filename}}" on the USB memory was changed.
The active configuration was changed by the user "{{username}}".
The start configuration was changed by the user "{{username}}".
IO device {{ip_address}}: MAC address monitoring in the protected network
led to contradictory answers: {{mac1}} vs {{mac2}}
IO controller {{ip_address}}: MAC address monitoring in the unprotected
network led to contradictory answers: {{mac1}} vs {{mac2}}
User "{{username}}", IP address: {{ip}}: Login attempt failed.
The IP address {{ip}} is locked because too many login attempts have
failed.
Device "{{name}}", IP address {{ip}}: The project CRC has been changed to
"{{crc}}".
Device "{{name}}", IP address {{ip}}: The device's MAC address was
changed to {{mac}}.
Device "{{name}}", IP address {{ip}}: Device is not active.
The start configuration was reset and the logging events were deleted in re-
covery mode.
The firmware with version {{version}} has been installed in recovery mode.
The firmware with version {{version}} has been installed in recovery mode.
User: "{{user}}"; IP address: {{clientIP}}: IP spoofing has been detected.
Fake IP address: {{spoofedIP}}
User: "{{user}}"; IP address: {{clientIP}}: MAC spoofing has been detected.
Fake MAC address: {{spoofedIP}}.
User "{{username}}", IP address: {{ip}}: Login attempt failed.
Some Client connections have been rejected because the maximum num-
ber of Clients has been reached.
The IP address {{ip}} is locked because too many login attempts have
failed.
Access to web service denied for IP address {{ip}}.
User "{{username}}", IP address {{ip}}: The IP address is blocked. Too
many attempts to change the password.
| 49