Log In To Client; Authentication Procedure - Pilz PCOM sec br2 Operating Manual

Access to the system in the protected network
9.3

Log in to client

When a Client connection has been created for a user, he can log in with his credentials to
the SecurityBridge to access the protected system. The credentials must be created on the
user interface of the SecurityBridge.
a Open the VPN client, click Connect, select a connection and enter your user name and
your password.
9.4

Authentication procedure

During authentication, the user name is always searched first in the local user management
on the SecurityBridge's user interface. If the user name cannot be found in the internal user
management and a RADIUS server is configured, a request is sent to the RADIUS server.
Operating Manual PCOM sec br2
1004534-EN-04
| 34