Network Interfaces - Pilz PCOM sec br2 Operating Manual

Wiring
7.3

Network interfaces

The device has 2 RJ45 sockets for connecting to Ethernet.
The Ethernet interfaces X1 and X2 must be used as follows:
}
Ethernet interface X1 (network port)
– Connection to the unprotected network (company network)
}
Ethernet interface X2 (device port)
– Connection to the protected network
}
Supported Internet protocol: IPv4
Supported functions:
} Autonegotiation
– When Autonegotiation is used, Autonegotiation must also be activated at the remote
} With deactivated autonegotiation:
– Communication speed: 10 Mbits/s or 100 Mbits/s
– Duplex: Half duplex or full duplex
Operating Manual PCOM sec br2
1004534-EN-04
station.
| 21