Operation; Led Indicators - Pilz PCOM sec br2 Operating Manual

Operation

11 Operation
11.1

LED indicators

Legend
PWR
Colour
- - -
Green
Red
DIAG
Colour
- - -
Green
Red
Red
Red
Bypass
You can configure the colour of the bypass LED.
Colour
- - -
Green or red
User
You can configure the function and colour of the user LED.
Colour
- - -
Green or red
Operating Manual PCOM sec br2
1004534-EN-04
LED on
LED flashes
LED flashes briefly
LED off
State
State
State
State
Meaning
No supply voltage
Supply voltage present. SecurityBridge is opera-
tional.
SecurityBridge is in recovery mode
Meaning
Unit is not ready for operation
No error present
One or more recoverable errors on the Security-
Bridge (for more information see event log).
One or more internal errors on the SecurityBridge
(for more information see event log).
Unreleased firmware is being used.
Meaning
Bypass mode is deactivated
Bypass mode is activated
Meaning
No function configured
Function depends on the configuration
| 38