Pilz PCOM sec br2 Operating Manual page 23

Configuration
3. Call up the user interface
a Start the Internet browser and enter an IP address of the SecurityBridge.
4. Register at the user interface
a Enter the user name and the password
Default credentials:
User name: admin
Password: <Serial number of the SecurityBridge> (the serial number is on the front of
the device (see
A maximum of 5 failed attempts can be made. Further logon attempts will be blocked
for 10 minutes.
5. Change initial password
A window for changing the password appears. Change the initial password. Enter a
safe password with at least 8 characters (for features of a safe password see
Security [
6. Change network settings
To access the SecurityBridge PCOM sec br2 from the company network, change the
network settings of the SecurityBridge. The settings are adapted in the Web interface
under System → Settings → Network (see also Online Help).
7. Start user interface with the new IP address
a Start the Internet browser and enter a new IP address of the SecurityBridge.
8. Generate new certificate
a On the user interface, select System > Certificates -> Generate certificates.
9. Copy active configuration into the start configuration
a On the user interface, select Maintenance > Apply active configuration in start
10. Download CA certificate
a On the user interface, select System > Certificates -> Certificate download.
11. Install CA certificate
a Install the CA certificate as a trustworthy root certificate (see
Operating Manual PCOM sec br2
1004534-EN-04
If a certificate error is displayed in the internet browser, temporarily add an excep-
tion rule and/or circumvent this warning message to still access the user interface.
Default IP address: https://192.168.222.1
Front view [
9]).
Enter the new IP address as General certificate name of the new certificate.
configuration, to save the configuration permanently in SecurityBridge.
Download the certificate in DER format (see
certificate [ 28]).
14]).
Manage certificates [ 28]).
Install CA
| 23